Introduction
Washing your car can be a chore or it can be fun. It’s really up to you and how much time you have. If you have a lot of time and want the best shine possible on your car, then by all means take it to the car wash. But if you’re looking for a quick way to get rid of dirt and grime from your vehicle, then this article will teach you how to do that yourself! Car detailing port Melbourne guys can give your car a quality shine look and even remove the small dents.
Prepare to wash your car.
- Prepare the area for washing.
- Prepare the car for washing.
- Prepare your equipment for washing.
Choose a shady spot for washing.
- Avoid direct sunlight. Washing your car in the sun can result in streaking and dullness. The best time to wash your car is when the sunlight is hitting it at an angle, especially if you have a black car.
- Avoid low spots where water pools up on the ground, as this can cause a wet spot on your paint job that will lead to streaking over time.
- Avoid high spots where water runs off quickly; this can create a dry spot that could lead to chipping or scratching on your paint job if left unchecked.
- Avoid areas where the ground is too hard or too soft—both conditions can damage your tires and wheels when parked overnight during washing days (if you’re not using a garage), so choose somewhere with moderate terrain that won’t affect these parts of your vehicle negatively
Rinse the surface of the entire car.
Rinse the surface of the entire car.
Use a high-pressure hose to rinse off the soap and grime from your vehicle. If you have access to a power washer, even better!
(Optional) Use a brush or sponge to get into the crevices of your car—you’ll want to give them special attention if you want them clean and shiny when you’re done.
Apply a soap solution and scrub one section at a time.
- Apply a soap solution and scrub one section at a time. The first step in washing your car is to apply and rub in a good quality car shampoo into the surface, working from the top down or side-to-side to avoid streaks and water spots. You can either use an applicator bottle or sprayer, or simply spray on your favorite shampoo directly with a trigger nozzle attached to your hose. Work on one section at a time (front bumper, hood, roof) before moving onto another area of your car—this will help you keep track of where you’ve washed already so that there’s less chance of missing anything important during rinsing later on!
- Rinse thoroughly with water after each pass over an area with suds on it–this prevents soap residue from drying onto paintwork which could scratch off easily later when it comes time for waxing/polishing
Rinse car again and dry.
Rinse the car with a hose or pressure washer again and dry with a soft chamois or towel. When using a regular towel, make sure to avoid rubbing too hard as this can cause swirl marks on your paint job. Use another clean cloth to dry windows and use another brush as necessary to dry wheels, tires, doorjambs, etc., but don’t forget to use soap and water if they are dirty!
Remove bugs and tar.
Begin by removing bugs and tar from your vehicle. If you have a bug and tar remover, apply it to the spot using either a sponge or towel. Then wash the car once a week to keep these pollutants from damaging the paint job over time. Finally, rinse with water and dry with a clean towel.
Wax once a year or so.
Waxing your car is a great way to protect the paint job. If you don’t have time or energy to wash your car every week, waxing can help keep the paint shiny and looking newer for longer. Waxing also helps prevent damage from UV rays and prevents water spots after washing.
Waxing isn’t just good for keeping your car looking great—it’s good for the environment as well! Most types of automobile wax are made with natural ingredients such as beeswax and coconut oil; these materials come from plants that grow in nature without harming animals or destroying their habitats in any way. Automobile wax is even better than other types of cleaners because it doesn’t leave behind harsh chemicals that pollute our air with toxic fumes when they’re used indoors (or outdoors).
You’ll be surprised at how easy it is to do this step properly: all you need is some elbow grease, a few minutes each month, and a few simple supplies like towels/cloths for drying your vehicle off afterward.
You could take your car to the car wash, but it’s easier and more fun to do it yourself using these 7 steps.
- Step 1: Gather your supplies (you don’t need much).
- Step 2: Wash, wash, and then wash some more.
- Step 3: Rinse away all the suds.
- Step 4: Dry off your car and admire its gleaming shine!
Conclusion
We hope you enjoyed this tutorial and found it helpful. If you want to get more information on how to wash your car, check out our other blog posts.