Make Vinyl Decals from Home

Make Money with a Vinyl Cutter

You can do the same work as most large sign shops in a corner of a room with very little money spent. You can make products to sell and earn an extra income with a vinyl cutter. Signwriters Sydney have supplied and installed many high-profile corporate signage and sale signs in Sydney and throughout Australia for many years.

I set up a small sign shop in a corner of a spare bedroom. I bought a Roland Stika SX-15 vinyl cutter which can hold up to a 15 inch wide roll of adhesive-backed vinyl film. I connect the vinyl cutter to an old laptop I was no longer using. The SX-15 hooks up to the parallel port and the computer recognizes the SX-15 as just another printer.

Roland provides an editing and printing software called Dr. Stika which can import .bmp bitmap files and convert them vector files which can be cut by the SX-15 vinyl cutter.

Once I upload a bitmap, convert it to a vector with a single button, I need to clean up around the edges of the vector so no cut lines intersect with any other lines. This is a simple process that anyone with basic computer skills can easily master. When the file is ready to cut, I hit the print button just like I would with any home printer. The Roland Stika Sx-15 then starts to cut into the vinyl without going to deep. Only the vinyl is cut but not the backing paper.

When the outlines of the picture is finished cutting the vinyl, I “weed” or remove pieces of vinyl that were cut and are not part of the picture. When all un-wanted pieces of vinyl are removed I cover the vinyl picture with a transfer film. This is used to cover the picture cut into the vinyl and secure the unconnected pieces of cut vinyl so it won’t loose it shape while I move it to the final destination surface you want to apply it to. Then I squeegee the air bubbles out of the vinyl and then remove only the transfer film. It’s just that simple, anyone can do it.

Cutting vinyl shapes can be an excellent side business.

Here are some ways I make money in my spare time with my Stika SX-15:

  • Decals for windows, Cutting masking for sandblasting mugs (I used regular vinyl, not the expensive sandblasting material).
  • Masking for liquid etching
  • Car decals; flames, swoosh, pin-striping
  • Tattoo decals. Copy the person’s tattoo and turn it into a decal for their car
  • Iron-on vinyl lettering and decals for T-shirts (my biggest money maker).
  • Creating yard signs (garage sale, home for sale)
  • Decals for laptops
  • Website decals that can be stuck anywhere like graffiti to get free advertisments.
  • Open hours signs for businesses
  • Pin-stripping decals for windows and motorcycles
  • Flame decals for motorcycle gas tanks and helmets
  • Ham radio call signs
  • Wall stickers
  • Custom stickers from someones hand drawn design
  • Wall quotes
  • Window decals, etc.

Vinyl cutters have dropped in price over the last few years. There are many economical package deals out there which include everything you need to get you started making money in a spare corner of a room.

Cutting a vinyl decal is super easy.
Sure there are better ways and a few tricks I left out. But I want to show you how easy it is to get started with a simple vinyl cutter. Once you can do this, then you can perfect your technique of cutting vinyl into products you can sell.

Stika vinyl cutter in action

Sell you crafts

There are so many ways to make an extra income with a vinyl cutter and you won’t need an office full of equipment. I keep all my supplies in plastic crates hidden in closets and under the bed in a spare bedroom. I have my vinyl cutter near my computer just like a standard printer. I use a fold-up table for the layout and applying the transfer tape which can be folded and put away under the bed when guests sleep over.

Having a vinyl cutter is a fun and exciting way to explore your creativity. Once you have a product designed that can sell, you can start selling on eBay or Etsy. Etsy is a great place to see your competition and get ideals for products to create using your cutter.

A vinyl cutter is a perfect way to enhance the look of products like clocks and photo frames. Adding vinyl cut boarders and graphics turns a dull clock or photo frame into a unique or custom made product you can easily sell.

Some of my biggest sellers were website; for example “www.enterjakarta.com.” Everyone knows someone who has a website they are promoting. Ask them if you can supply their website logo or name on a vinyl sticker. Website decals are sold in packs of ten, twenty or more. At a few bucks each you could easily make some serious cash within a few hours.

I also sold t-shirts using my vinyl cutter. I bought heat transfer vinyl material that can be cut with the vinyl cutter, then ironed-on to t-shirts using a simple home-use iron. The only thing to add is a sheet of wax paper or Teflon sheet to protect the vinyl from direct heat of the iron.

I sold many shirts at $15 each. A $200 heat press would be nice but not required. I like doing everything “on the cheap” at first, until I can afford the nice equipment. A simple $20 iron worked fine. My wife started helping with the ironing, and that worked great. In a few hours we could make a hundred dollars worth of shirts. First cut the vinyl, weed out the unwanted bits, put on the transfer film, move the vinyl to the shirt, then remove the transfer paper. Use a hot iron to secure the vinyl to the shirt permanently. It’s as easy as that, anyone can do, including you. For custom made signs for your business you may check our website.

10 Luxury Kitchen Ideas For Fraction of the Price

Wouldn’t you love for your kitchen to feel like a luxury home kitchen? The reality – you can achieve it for a fraction of the price. A luxurious home environment can be yours with these helpful tips. With these exquisite luxury kitchens Sydney, we are sure that you will build a beautiful spot in your home.

1. Substitute granite countertops for granite top overlays. Several companies make a polymer/granite “shell” that fits directly over your current countertop. The result? A countertop that looks like you spent thousands, for half of the granite price.

2. Instead of marble tile flooring, use ceramic tile. Several man made varieties of tile mimic the look of marble and can save you money.

3. Substitute hard wood flooring with high-end laminate wood varieties. Hardwood is expensive and has high maintenance. High-end laminate flooring looks just like real hardwood, and comes in hundreds of choices. It also can get wet, and doesn’t scratch like hardwood flooring.

4. Substitute granite sinks for deep bowl- under mounted stainless steel sinks. Sinks can be expensive, especially when using granite, or other solid surface material. Use a deeper bowl, two or three compartment stainless steel sink. This will keep the sleekness you desire, without the high price tag.

5. Instead of custom faucets and fixtures, use ‘off the shelf’ varieties. Many luxury kitchens have high-end custom fixtures. These days, home improvement stores offer the same great looks, but by common manufacturers. Delta, Moen, American Standard are just a few that will save you money, without anyone knowing.

6. When renovating a kitchen, re-face wood cabinets instead of starting new. This process involves keeping the original cabinet, but having a laminate finish over the old. Cabinet and drawer fronts are brand new. With new door pull hardware added, the final look is of high-end cabinets that don’t hurt your wallet.

7. Instead of expensive, sleek metal cabinetry, use self-assembly cabinet manufacturers. Instead of spending thousands on sleek, modern cabinets visit a store like IKEA. They have dozens of choices for cabinetry that you can assemble yourself. If you need help, they have assistance that you can purchase separately.

8. Substitute stainless steel appliances for stainless steel finish appliances. Appliance manufacturers now offer stainless steel finish appliances. These appliances don’t give the fingerprints that stainless steel gives, and the appearance is still modern and luxurious.

9. Instead of crystal and expensive lighting fixtures, choose “off the shelf” fixtures. Pendant, recessed, and under counter lighting fixtures can be expensive. Use varieties that are readily available at your favorite lighting or home improvement store.

10. Instead of granite and mosaic tile backsplashes, consider using glass and ceramic tile. Mosaic tile and granite can be expensive and laborious to install. With the wide variety of tiles the options are limitless. You can achieve a high end backsplash, to compliment your luxurious kitchen without the cost!

How To: Clean Concrete

When it comes time to learn how to clean concrete, realize you don’t need to be delicate; after all, it’s a very hard material. Calculating the cost of new driveway Perth requires that you consider several options.

In order to clean concrete outdoors, you can rent a pressure washer for use in combination with a biodegradable detergent. Indoors, your supplies are likely to be a bucket, detergent, and scrub brush, with or without a wet/dry vac at job’s end.

These approaches will enable you to get a long way toward removing ground-in dirt, mildew, spilled paint and most food stains. But the bad news for the fastidious homeowner is that concrete is a porous material with innumerable tiny voids that can harbor dirt, mold, and all kinds of deep, stubborn stains.

I once tried cleaning a concrete floor that had been exposed to leaky oil pans and transmissions for years and years. Power washing did very little. What helped a little, though ultimately not enough, was scrubbing the area with TSP, then hitting it with the hose. As a last resort, I used an application of muriatic acid, which successfully vanquished all of the remaining oil spots.

Muriatic acid is also useful in cleaning excess smears of dried mortar and grout, or when attempting to alleviate tough rust stains. But please be advised that you must be extremely cautious with this powerful acid. Don’t even use muriatic acid unless you really need to. If you must, then be sure to wear protective gear (including protective clothing) and always follow the manufacturer’s directions for dilution. Allow for plenty of ventilation.

My preference is to begin with the least toxic cleanser and up the ante as needed – especially when first learning how to clean concrete. Try applying common detergents directly to the tough spots and scrubbing with a bristle (not wire) brush. Hydrogen peroxide or ammonia also work well.

For indoor jobs, you might try scrubbing with TSP before rolling on a masonry primer and a masonry topcoat. Such a coating would hide the old stains and seal the concrete to prevent further staining.

Concrete sealer is a reliable option for avoiding stains in the first place. Choose a clear silane- or siloxane-based water-repellent sealer and apply the product with a paint sprayer or roller. Sealing will not affect the appearance or traction of the concrete surface.

For more on cleaning, consider:

How To: Clean Slate
Top Tips for Cleaning Grout Lines
How To: Spring Clean Your Power Tools

Ideas To Figure Out How To Be A Good Web Designer

Having a solid understanding of knowledge about good website design practices is essential for running a successful site. Good web design will make your website comfortable to use, but also more comfortable to use, and gives it a more genuine feel. It will increase your traffic, and keep them coming back for more. The following article below discusses some of the things you can do to be successful at web design. There are free logo online but some are not fit on your brand, I think it would be better if you have it build using this tool from this site Online-logomaker.com

Pay attention to the way the different colors you use on your website to make sure they match. Make sure that text visible against the background hues. Dark text on light backgrounds are typically easier on the easiest for your visitor to read. Let some of your friends see your color scheme to get their input.

Don’t make page sizes any larger than necessary.Users with slower Internet connections may decide that the wait isn’t worth it if your site loads slowly. You don’t want people to have to abandon your visitors waiting for each page to load because the pages won’t load.

Don’t let content on your website. You will come across as undependable or an amateur if the promotional offer on your page expired months ago. Users wants to browse sites that they know are updated frequented with relevant fresh content, and when old information is kept up it shows that the site is not being paid attention to. Set yourself a schedule to update content and removing anything that is outdated.

This will help your customer quickly find the search engines.

Don’t use frames when you want a site search engines can crawl! Although some users like frames, search engines can’t see it. Your rating will not be very high if the information isn’t visible.You won’t get many visitors.

Remember to utilize ALT tags for images as you use in your website. These tags are very important for your website and people that disable graphics. If your images are used as links, your ALT tags will tell people how the link will behave.

Good meta tagging practices will help your website makes it to a good rank on search engines.Quality and relevant meta tags will help search engines to recognize what your site is all about. If you have poorly thought out the meta tags that have no reflection on what your sites content is, do not expect to get a lot of visitors.

Make sure your load times are up to par at all times. Visitors are not going to wait around forever for pages to load.

Use conditional loading and independent CSS pages as you design. These techniques will make it easier to test and maintain them later. You want to have to maintain it and this will make it easy.

You can look at an infinite number of websites where there is so much information to help you design your own site. Remember that borrowing ideas isn’tt enough to make your site is to be successful. You should always improve ideas.

A visitor counter is outdated and not add to the appearance of your website. Get rid of visitor count and use other methods to see how many visitors your site is getting.

Using the tools from a host to build your site is great for basic layout, but you don’t want to rely on the design tools completely. You want to integrate your own personality into this site, so this means adding enhancements that the website builder may not offer.

Adobe Dreamweaver is great for those that wish to create a website. This program is easy for anyone to use.

Use a basic layout that will help you build a website.

Try to manage your time management when you are designing your website.If you are not careful, those tasks will stack up quickly.

The search button should read “Search.”

Create a website icon on your website. This is a tiny graphic that can help visitors distinguish your site if they add it to their bookmarks. A good favicon that is easy to remember will cause your page to jump out from a page full of bookmarks. Your favicon should be in keeping with the rest of your site’s content.

Neutral background colors are best for website backgrounds. Stick to a white background or another neutral shade. It’s a fact that neutral colors are the easiest backgrounds from which to read.

You gain a lot from using all the different web design tools available to you. Using best practices helps your site exude a genuine feel. It engenders trust in your visitors. Additionally, visitors will find your site more attractive and user-friendly. The design of your website can be what makes or breaks it. You have just been handed some great web design techniques courtesy of this article. Utilize them to ensure the success of your website!