In the first place, chips and scratches caused by rocks and road debris can be eliminated of you apply a paint protection Adelaide. There are a few basic car paint job steps that are considered “must knows” in the industry. At nanoshine.com.au, you will learn these steps in an easily understandable format. Of the many sites and courses that offer basic car paint job steps, you will quickly find that nanoshine.com.au is ahead of the curve.
For example, one step that you must know how to do will be assessing the scope of your project. If you just want to fix up minor scratches and blemishes in your finish, your job will be quite small and easily completed. You will likely require a small touch up can to do this. These can be purchased in your local auto body store.
If you find that you are painting to fix large areas of collision damage, long scratches that go across panels or a complete repaint you will need a spray paint gun. While these are not cheap, they are one of the best tools you can purchase. If well maintained, they will quite literally last forever. If you are on a budget, these can be rented from auto body shops. If you do this make sure to check that the gun has been well maintained and cleaned after each use.
In addition, you should prepare an area to paint. This could mean constructing a paint booth in your home garage. Alternatively, you can rent one, but it may be out of your budget. Just make sure your garage is adequately ventilated by propping up a fan in between the ground and the garage door. You should also clean the area to make sure it is free of dust and debris particles. Rentals will have these considerations in mind as they are often cleaned and have fans built into the walls.
Another one of the basic car paint job steps would be preparing your surface for fresh paint. If you must remove paint first, you will have to use a hand sander. You can also use a media blaster or chemical remover. While these methods are less labor intensive, they are also messier and more dangerous. You will want your paint surface to be as smooth as possible. This will ensure a professional look when you are finished. You do not want your paint to look bumpy or find blemishes after you spend hours completing your new finish.
For more information on how to paint a car, I would recommend nanoshine.com.au. This is where I found these steps. Here you will find a course that explains these steps in depth while also offering everything else you need to know to learn how to paint a car.